Water in wash cabinet

Clean the filter combination as follows:

• Turn off the dishwasher.

• 

• Rotate the screw thread of the lower spray arm counterclockwise  (when viewed from above). Pull the spray arm upward  to remove it.

• Before removing the filter combination, remove any coarse soiling to prevent it from entering the circulation system.

• 

• Remove the filter combination.

• 

• In order to clean the inside of the filter, pull the microfilter downward and away from the filter combination by gripping the plastic ring.

• Rinse all the parts under running water.
  Use a soft cleaning brush to remove soiling.

• Insert the microfilter back into the filter combination.

• Reinstall the filter combination so that it lies flat in the base of the wash chamber.

• Reattach the lower spray arm to the filter combination using the screw thread.

• 

• Rotate the screw thread clockwise until the arrow in the viewing window points to the lock symbol .

Clean the drain pump as follows:

• Disconnect the dishwasher from the power supply. To do this, turn off the dishwasher and unplug the electrical plug.

• Remove the filter combination from the wash cabinet (see above).

• Scoop the water out of the wash cabinet using a small container.

• 

• Press the catch of the drain pump cover inward .

• Tip the cover inward until it is released .

• Rinse the cover thoroughly under running water. Remove all foreign objects.

• 

• The drain pump (see arrow) is underneath the cover.

• Risk of injury from glass splinters.

  It is especially difficult to see glass splinters in the drain pump.

  Take care when cleaning the drain pump.

• Carefully remove any foreign objects from the drain pump. Check the drain pump impeller by manually turning it. You will feel a little resistance when you turn the impeller.

• Reinstall the cover by pushing down.

Remove any kinks from the drain hose.