Factory default settings
You can reset the robot vacuum cleaner to the factory default settings.
In order to do this, the robot vacuum cleaner must be switched on and must not be in standby mode.
To reset the robot vacuum cleaner to the factory default settings, proceed as follows:
Press and hold the “Spot” and “Turbo” sensors at the same time for at least 5 seconds.
“rST” is shown on the robot vacuum cleaner display for 3 seconds.
Press the OK button on the remote control during these 3 seconds until a three-step audible signal sounds.
“F:tr” is shown on the robot vacuum cleaner display. The robot vacuum cleaner is then reset to its factory default settings.
The following information is reset to the factory default settings:
WiFi SSID
WiFi password
Set timers
Saved maps
Information that was exchanged with the cloud during the pairing process is regenerated.
The connection to the cloud is removed.
