SearchFind a store
Support for your

Robot Vacuum Cleaner

Robot Vacuum Cleaner

Robot vacuum cleaner switches off again immediately

After switching on, the robot vacuum cleaner switches off again immediately.

The battery is empty.

Recharge the robot vacuum cleaner’s rechargeable battery.

The rechargeable battery no longer works and must be replaced.

Replacing the rechargeable battery

Keep a spare original Miele lithium-ion rechargeable battery to hand for your robot vacuum cleaner.

Original Miele accessories are available from the Miele online store, Miele Service, and your Miele dealer.

RX2 and RX3:

The rechargeable battery compartment is located in the robot vacuum cleaner’s storage compartment.

Open the storage compartment.

Remove the dust box.

Opening | Battery compartment | RX2, RX3 robot vacuum cleaner

Open the rechargeable battery compartment by unlatching the cover upward.

RX2/RX3-YCR-M05 (RX2/RX3 60 lithium-ion battery):

  • Removing | Battery | RX2, RX3 robot vacuum cleaner
  • Carefully pull the cords so that the plug connection is pulled out of the slot.

  • Press the latch on the plug connection in order to release the electrical plug.

  • Remove the rechargeable battery.

  • Inserting | Battery | RX2, RX3 robot vacuum cleaner
  • Insert the electrical plug of the new rechargeable battery into the counterpart, making sure it clicks into place.

  • Insert the rechargeable battery carefully, making sure it is properly positioned (see right section of figure).

  • Store the plug connection in the side slot.

RX2/RX3-YCR-MT12 (RX2/RX3 120 lithium-ion battery for Runner and Home Vision):

  • Removing | Battery | Runner Home Vision
  • Carefully remove the rechargeable battery using the tab until the plug connection is exposed.

  • Press the latch on the plug connection in order to release the electrical plug.

  • Remove the rechargeable battery.

  • Inserting | Battery | Runner Home Vision
  • Insert the electrical plug of the new rechargeable battery into the counterpart, making sure it clicks into place.

  • Store the plug connection in the side recess.

  • Insert the rechargeable battery carefully, making sure it is properly positioned (see right section of figure).

Closing | Battery compartment | RX2 RX3 robot vacuum cleaner

Carefully reinstall the cover of the rechargeable battery compartment and close it, making sure that it clicks into place.

Dispose of the battery at a suitable waste collection/recycling center.

RX1 (YCR-M05):

Place the robot vacuum cleaner upside down on a level, clean surface.

Do not lift the robot vacuum cleaner by the area around the dust box, as it can come loose.

Opening | Battery compartment | RX1 robot vacuum cleaner

Unscrew the cover of the rechargeable battery compartment on both sides with a cross-tip screwdriver.

Removing | Battery | RX1 robot vacuum cleaner

Carefully remove the battery. Press the latch on the plug connection in order to release the electrical plug.

Inserting | Battery | RX1 robot vacuum cleaner

Insert the new rechargeable battery.

Close the battery compartment cover and tighten the screws.

Dispose of the battery at a suitable waste collection/recycling center.

A software fault has occurred.

Contact Miele Service.

Manual finder

Manual finder

Here you will find the operating instructions for your Miele appliances.
Find your manual
Book a technician

Book a technician

We will happily take your repair booking online.
Schedule a service call
Support 24/7

Support 24/7

Use our contact form to describe your request. Miele Service will get back to you as soon as possible.
Contact us