Support for yourSteam Oven

Fault F05

Fault F05 is shown on the display of the steam oven/combi-steam oven.

The water intake valve is not fully open.

Open the water intake valve fully and start operation again.

The nozzle must be descaled if the fault message F05 appears in the display.

To descale the nozzle, proceed as follows:

Wait until several audible signals sound.

A large amount of hot steam may escape when the door is opened. The food will also be very hot.

Danger of burning

Open the door and remove the food.

Leave the door open to cool down the steam oven.

Remove the side runners.

Pull out the nozzle; see figure.

Descale the nozzle using the Miele descaling agent.

After descaling, rinse the nozzle under running water.

The steam oven can now be used again as normal.

If the fault persists, please contact us or book a repair appointment online.

For thorough and gentle cleaning of your steam oven, it is recommended to use Miele products which also care for your appliance at the same time.

Here you will find the operating instructions for your Miele appliances.

We will happily take your repair booking online.

Use our contact form to describe your request. Miele Service will get back to you as soon as possible.