The float switches in the water container are jammed.
The fill level inside the water container is measured by float switches; see figure. The fault message F94 may be displayed if the appliance has not been used for an extended period and there is still water in the water container. This can cause one or both float switches to get stuck.
The lids on the float switch casings are friction-welded.
If you remove them, the water container will become unusable. The float switches might fall out of the float switch casings.
Never attempt to remove the lids from the float switch casings.
Clean the water container:
Remove the water container after each use. To do this, push it upward slightly as you take it out of the appliance.
Empty the water container. Water can drip into the container compartment when the water container is removed.
Dry the compartment.
Rinse the water container by hand or in the dishwasher. The water container is dishwasher-safe.
Dry the water container with a cloth to prevent limescale.
Descale the water container:
Rinse the water container with clean water.
Fill the water container with lukewarm water.
Add 1 descaling tablet to the water container.
Leave the descaling solution to work for approx. 10 minutes.
Clean the float switches with a small bottle brush.
Rinse the water container thoroughly with clean water.
For thorough and gentle descaling of the water container, genuine Miele descaling tablets that have been formulated for use with your appliance are recommended.
